-
Nederland
Nederland
Introducing the Ernie Ball Music Man Jason Richardson Artist Series Cutlass Guitar, now available in Kokiri Forest or in limited edition Venetian Red. Crafted with an alder body, a buckeye burl top, and a roasted, figured maple neck or white maple neck with an ebony fretboard, these new guitars set a new standard in aesthetics and performance. The custom Jason Richardson HT humbuckers are exclusive to the Jason Richardson 2024 Cutlass models, delivering unparalleled clarity and power tailored for today's guitar virtuosos. All Jason Richardson Artist Series Cutlass guitars feature 24 stainless steel frets, a custom Music Man tremolo, and innovative electronics, including a push/push volume knob for a 20+ dB gain boost and coil splitting via the push/push tone knob. The Jason Richardson Artist Series Cutlass HT in Venetian Red is limited to 25 units in a 6-string and 25 units in a 7-string.
Kokiri Forest
Venetian Red
Built to Jason Richardson's exact specifications, the Cutlass incorporates a multitude of design features to further enhance comfortability, playability, and overall performance.
The Jason Richardsonson HT bridge pickup outperforms normal-spec pickups with more output, dynamic range, and excellent touch sensitivity. The pickup not only achieves high output but also garners a powerful low-end response while retaining a distinctively clean, clear tone and definition at lower volume levels.
Most tapped humbucking pickups produce a thin sound. HT technology offers superior power and enhanced richness compared to conventional tapped humbucker coils. The custom-wound pickup produces a more authentic, rich single-coil sound when the HT coil is tapped.
The preamp boost is activated by a push-push volume knob and is factory set to 12db. Via a trim pot inside the control cavity, the preamp can be adjusted up to 20db if needed for heavy rhythm parts or high-octane soloing whenever the user chooses.
The Jason Richardson Cutlass features a perfectly balanced lightweight double-cutaway body design, allowing unparalleled access to all 24 medium jumbo frets. Additionally, the roasted maple neck is hand-shaped with a shallow neck carve for very fast playability.
Hand-selected body and neck woods are sustainably sourced from our network of hardwood suppliers worldwide. Alder, burl, and maple are individually chosen and matched for their beautiful appearance and rich tonal qualities.
| Specificaties | |
|---|---|
| Model | Jason Richardson 6-string Cutlass HT Guitar |
| Bestel | 1 |
| Grootte | 12-7/8" wide, 1-5/8" thick, 38-1/8" long (32.7 cm wide, 4.1 cm thick, 96.8 cm long) |
| Body Hout | Alder with buckeye burl top (Kokiri Forest); Alder with maple burl top (Venetian Red) |
| Body Afwerking | High gloss polyester (Kokiri Forest); Satin (Venetian Red) |
| Bridge | Custom Music Man® floating tremolo, made of black, hardened steel with black steel saddles |
| Scale Length | 25-1/2" (64.8 cm) |
| Neck Radius | 15" (38.1 cm) |
| Headstock Size | 6-3/8" (16.2 cm) long |
| Frets | 24 - Medium Jumbo profile, Stainless Steel |
| Neck Width | 1-11/16" (43.00 mm) at nut; 2-1/4" (56.9 mm) at last fret |
| Neck Hout | Figured roasted maple |
| Fingerboard | Ebony ( Kokiri Forest) - Striped Ebony (Venetian Red) |
| Fret Markers | Dot inlay |
| Neck Afwerking | Gunstock oil and hand-rubbed special wax blend |
| Neck Binding | N/A |
| Tuning Machines | Schaller M6-IND locking |
| Truss Rod | Adjustable - no component or string removal |
| Neck Attachment | 5 bolt, sculpted neck joint |
| Electronic Shielding | Graphite acrylic resin coated body cavity and aluminum control cover |
| Controls | Custom Music Man® active preamp w/ Silent Circuit; 25kohm push/push volume POT for gain boost, 500kohm push/push tone POT for pickup coil splitting - 0.022uf tone cap; 3-way pickup selector switch |
| Switching | 3-way toggle pickup selector; Push/push volume knob engages boost |
| Pickups | HH - Music Man HT Custom hum bucking pickups, Ceramic magnets |
| Left Handed | No |
| Snaren | 10p-13p-17p-26-36-46 (RPS 10 Slinkys #2240) |
id => 117
iid => 117
enabled => 1
header_1 =>
header_2 =>
wiring_image => 0
created_at => 2024-08-12 16:13:03
updated_at => 2024-08-12 16:13:03
| Specificaties | ||
|---|---|---|
| Model | Jason Richardson 6-string Cutlass HT Guitar | |
| Order | 1 | |
| Size | 12-7/8" wide, 1-5/8" thick, 38-1/8" long (32.7 cm wide, 4.1 cm thick, 96.8 cm long) | |
| Body Wood | Alder with buckeye burl top (Kokiri Forest); Alder with maple burl top (Venetian Red) | |
| Body Finish | High gloss polyester (Kokiri Forest); Satin (Venetian Red) | |
| Body Colors | ||
| Body Bindings | ||
| Bridge | Custom Music Man® floating tremolo, made of black, hardened steel with black steel saddles | |
| Pickguard | ||
| Scale Length | 25-1/2" (64.8 cm) | |
| Neck Radius | 15" (38.1 cm) | |
| Headstock Size | 6-3/8" (16.2 cm) long | |
| Frets | 24 - Medium Jumbo profile, Stainless Steel | |
| Neck Width | 1-11/16" (43.00 mm) at nut; 2-1/4" (56.9 mm) at last fret | |
| Neck Wood | Figured roasted maple | |
| Fingerboard | Ebony ( Kokiri Forest) - Striped Ebony (Venetian Red) | |
| Fret Markers | Dot inlay | |
| Neck Finish | Gunstock oil and hand-rubbed special wax blend | |
| Neck Colors | ||
| Neck Binding | N/A | |
| Tuning Machines | Schaller M6-IND locking | |
| Truss Rod | Adjustable - no component or string removal | |
| Neck Attachment | 5 bolt, sculpted neck joint | |
| Electronic Shielding | Graphite acrylic resin coated body cavity and aluminum control cover | |
| Controls | Custom Music Man® active preamp w/ Silent Circuit; 25kohm push/push volume POT for gain boost, 500kohm push/push tone POT for pickup coil splitting - 0.022uf tone cap; 3-way pickup selector switch | |
| Switching | 3-way toggle pickup selector; Push/push volume knob engages boost | |
| Pickups | HH - Music Man HT Custom hum bucking pickups, Ceramic magnets | |
| Left Handed | No | |
| Strings | 10p-13p-17p-26-36-46 (RPS 10 Slinkys #2240) |
